? push coating industry information and technical information every day, welcome to pay attention to us!
? focus on real stone paint and interior and exterior wall decoration construction
? service hotline: 0561-2335665
It has become a reality that the sand in water multicolor coating is favored by coating companies and developers. Compared with the water-in-water multi-color coating, the film has better impact resistance and longer service life; compared with the real stone paint, the water-in-sand multi-color coating has higher simulation degree, closer to the natural stone, and more convenient construction. It is also because of this, the water bonded sand multi-color coating has become a hot spot of research and development and promotion of major coating manufacturers and brands.
Many colors
Generally, architectural coatings can only present one color at a time, and color coordination can be carried out through edge hooking and plate matching; while multi-color coatings can present multiple color patterns at the same time through one spraying, without secondary processing. Different atmosphere can be presented by changing different background colors. For different places, different atmosphere can be set off with different colors according to different functions.
Novel modeling
Because the composition principle of multi-color coating is different from that of general building coating, and the characteristics of multi-color pattern are still retained after spraying, the visual effect of different depth and pattern can be formed on a spraying surface through different shapes of multi-color particle size, which is impossible for general coating. At the same time, large, medium and small particles are not piled up mechanically, but arranged naturally and hierarchically, showing a unique decorative effect. According to the change of construction technique, different patterns can be obtained.
Stereoscopic perception
The different colors of the multi-color paint and the concave and convex texture of the real stone paint make people feel similar to the foaming wallpaper, which has high hardness and can not scratch off the powder.
Simple construction and one shot forming
The construction is convenient and simple. The cost of water sand stone like paint is 100% lower than that of traditional paint. The unit consumption is 1-1.4kg/m2, and the material cost is 200% lower than that of traditional paint. It is beneficial to control the budget of external wall coating project, not only shorten the construction period, but also greatly reduce the labor and material costs.
The main characteristics of the water bonded sand multi-color coating are that the pattern and texture are integrated. After spraying, the pattern is formed in one shot, and the texture effect of the spraying surface is outstanding. However, at present, most of the water sand multi-color coating, the pattern effect can be reflected, but the texture is completely poor. Correct the cause. The proportion of sand is wrong. Sand in water, the sand content must be more than 30%, the texture can be well reflected, but most manufacturers, because of the limitations of technology, the sand content can only be 20-30%, the template produced completely can not reflect the texture of the surface stone.
Sand can't be wrapped
Compared with water in water multicolor coating, the coating technology of water in sand multicolor coating has higher requirements. Once there is no wrapping, there will be loose sand, color changes, and product stratification, a large number of sand precipitated at the bottom of the barrel. At this point, on the one hand, it is very important to choose the type of sand and the quality of protective glue. Compared with natural colored sand, on the one hand, the color of calcined sand is uniform and easy to control. The key point is that the proportion of calcined sand is smaller than that of natural colored sand, which is easy to wrap, and there is no precipitation stratification phenomenon.
Thickening after product, particle hardening
We often hear from customers that after a certain brand of sand in water multi-color coating arrived at the construction site, the material thickened, the particles hardened, and the spraying could not be opened. In this respect, it depends on the type of emulsion. If the reactive emulsion is used, the thickening problem will happen easily. In addition, the problem of sand is mentioned again. Ordinary quartz sand and natural colored sand have high water absorption, and the viscosity of the product is difficult to control. Calcined sand, the surface has a layer of glaze technology treatment, water absorption is very low, not easy to destroy the viscosity of sand in water multi-color coating, the product is relatively more stable.
Brief introduction of Huaibei Qingfeng coating Co., Ltd
Dear wall decoration company,
Paint shop and owners:
Our company is an integrated manufacturer of production and construction, accepting decoration construction of large, medium and small-sized home decoration, tooling, construction site, office building, painting, puttying, real stone paint, diatom mud, etc. Purchase paint and deliver it to your home. There are jobs and materials. You don't need to find a second one. The manufacturer can construct it without worry!
Our company specializes in the production of wall paint for more than 20 years, the integration of production and construction of exterior wall decoration expert / professional technology / ingenuity construction.
Huaibei Qingfeng coating Co., Ltd. contact us:
Tel: 15856176637 (Manager Zhang) address: South of Kaiqu East Road, Longhu high tech Zone, Huaibei Economic Development Zone official website: www.ahqftl.cn email: 895152312@qq.com