The machine operation rate for dyeing has dropped to 30%. How should one choose the aminosilicone oil for textile use?
Hits: 589
img
One cannot simply rely on the figures "the global market size of super-smooth amino silicone oil is approximately 1.3 billion yuan, with an annual growth rate of 3.7%" or the selling points of amino silicone oil such as "soft and smooth" to directly conclude that a certain amino silicone oil is suitable for all fabric systems and finishing processes. Amino silicone oil is a textile finishing agent with amino functionalization, and its mainstream products have viscosities ranging from 500 to 10,000 cSt, with amine values ranging from 0.2 to 1.0 mmol/g. It is applied to cotton, polyester, nylon, blended, and silk fabrics through absorption method or immersion coating method. Currently, the characteristics of the textile industry's off-season are prominent: the opening rate of dyeing is reduced to 30%, weaving of autumn and winter tail orders is completed, new cotton is on the market, which suppresses the cost of cotton yarn, and downstream auxiliaries enterprises are more restrained in purchasing silicone oil. One must first confirm the type of fabric fibers, the requirements for hand feel style (soft and smooth, smooth and fluffy), the requirements for whiteness and color lightness, the finishing process (immersion coating/immersion/dip coating), the compatibility of co-solvents, environmental compliance requirements, and the baking conditions, before determining whether the poor hand feel, high-temperature yellowing, silicone spot breakage, and poor washability problems are caused by improper amine value selection, insufficient emulsion stability, deviation in process parameters, conflicts with dyeing auxiliaries, or poor matching between the product and the fabric system. Amino silicone oil can be the main direction for textile softening finishing, but it must be confirmed through small sample, scaling-up tests, and hand feel and whiteness verification of finished products.
1. Why do hand feel and yellowing problems often occur during dyeing and weaving production with amino silicone oil finishing?
The pre-treatment of the fabric is not thorough, with residual dyes, anionic auxiliaries, or sizing remaining, which affects the adsorption and film formation of amino silicone oil on the fiber surface.
Improper amine value selection: high amine value gives a soft hand feel but has a high risk of yellowing; low amine value has low yellowing but insufficient softness; it is not matched according to the fabric color and requirements.
Improper viscosity selection: high-viscosity products are smooth and lubricating but difficult to emulsify and disperse; low-viscosity products are easy to process but lack hand feel support.
The emulsion system is unstable, interacting with the working solution's pH, electrolytes, anionic dyes, and dispersants, resulting in emulsion breakdown, roller sticking, and silicone spots.
Common coarse emulsions have large particle sizes and poor permeability, covering unevenly on high-density fabrics or ultra-fine fiber, and resulting in inconsistent hand feel inside and outside.
Excessive high-temperature setting or baking temperature, and long time, aggravate amino oxidation yellowing, especially for white and light-colored fabrics.
Improper dosage control: excessive application reduces the fabric's moisture absorption capacity and causes excessive smoothness; insufficient dosage results in no significant improvement in hand feel.
The temperature, ratio of the bath, and drying curve of immersion coating do not match the product requirements, and there are significant differences between laboratory small samples and workshop large cylinders.
Block copolymer silicone oil, polyether silicone oil, and conventional amino silicone oil are mixed or used in the same bath with waterproof, anti-wrinkle, or flame retardant agents, and their compatibility has not been verified, resulting in "softness conflicts".
Although amino silicone oil microemulsion has small particle size and good transparency, it has higher requirements for emulsification systems and storage conditions, and the risk of emulsion breakdown cannot be ignored.
Batch-to-batch particle size and amine value fluctuations are large, resulting in uneven hand feel of the entire cylinder fabric, and the rework cost is extremely high.
Export orders require environmental testing such as OEKO-TEX and ZDHC, and products containing APEO or harmful residues are excluded by procurement hard criteria.
2. First, determine which process step the finishing problem occurs in.
Stage; Section
Possible causes
Prioritize checking the direction
The working liquid is turbid or stratified during the mixing process
Poor emulsion stability, pH or electrolyte conflict
Incompatibility of ion types, water quality, and material preparation sequence
Adhesion problems after machine operation, silicosis
Dissolution failure, excessive particle size, or excessive dosage
Emulsion type, working liquid concentration, bath ratio
Feel too hard or not slippery enough
Improper selection of amine value/viscosity, insufficient dosage
Product selection, concentration, and process time
Yellowing of the backfill material after high-temperature baking
High amine value product, excessive baking temperature
Amine value, setting temperature/time, low yellowing formulation
Rebound of the feel after washing
Insufficient film-forming washability, poor adhesion
Product structure, cross-linking system, process
Failure of coagulant or dyeing aid in the same bath, or abnormal dyeing
Fighting with anionic dyeing aids
Ion compatibility, feasibility test of coagulant in the same bath
Uneven feel of batches
Batch variation of raw materials, distortion of the expanded process
Supplier batch data, pilot-scale verification
Decrease in whiteness of light-colored fabrics
High amine value, lack of low yellowing design
Low yellowing/hydrophilic modification scheme
If only focusing on "whether the silicone oil is soft" without recording the fiber type, amine value/viscosity, working liquid pH, baking curve and list of coagulant in the same bath, it is usually difficult to determine whether it is a product problem or a process problem.
III. Why increasing the amine value or dosage may not be effective?
Increasing the amine value may enhance adsorption and softness, but it will simultaneously increase the risk of yellowing at high temperatures, which is not worth it for light-colored fabrics.
Increasing the viscosity can enhance the lubricating and smooth feeling, but it increases the difficulty of emulsification and dispersion, and improper handling may even cause silicosis.
Increasing the dosage may improve the feel, but excessive dosage reduces the moisture absorption, produces a waxy feel, and causes excessive smoothness, and also increases costs.
Replacing with a more expensive micro-emulsion does not mean solving everything: it is more sensitive to the emulsification system and storage conditions, and improper use can still cause dissolution.
When the fabric pretreatment is not clean, any product is difficult to achieve ideal adsorption, and it is necessary to check the pretreatment first and then adjust the formula.
When interacting with other auxiliaries, adjusting the silicone oil alone cannot solve the problem; it is necessary to adjust the material preparation sequence or treat separately in the bath.
The feel of the laboratory sample does not represent the large tank performance; the deviation of the washing temperature, bath ratio, and drying curve after scaling-up needs to be verified through pilot-scale testing.
Poor batch stability of the supply source, even a single small sample passing is not enough to guarantee the consistency of the entire batch of fabrics.
Therefore, optimizing the application of amino silicone oil should simultaneously confirm the fabric system, amine value/viscosity selection, emulsion type, process parameters, and coagulant compatibility in the same bath, rather than only adjusting a single parameter.
IV. What are the public parameters and applicable directions of amino silicone oil?
Parameter categories
Public information
Chemical type
Amino-functionalized polydimethylsiloxane (amino silicone oil)
Common viscosity
<500 cSt (easy spreading emulsification), 500 - 1000 cSt (routine finishing), 1000 - 5000 cSt (strong deposition conditioning), >5000 cSt (high-performance smoothness)
Amine value classification
<0.2, 0.2 - 0.5, 0.5 - 1.0, >1.0 mmol/g, increasing functionality
Ion type
Weak cationic type (dominant), nonionic compatible type (good compatibility)
Product form
Silicone oil concentrate, ordinary emulsion, nano-sized microemulsion (particle size 10 - 100 nm)
Market size
Global ultra-smooth amino silicone oil is approximately 1.301 billion yuan in 2025, and is expected to reach nearly 1.678 billion yuan by 2032, with a CAGR of 3.7%
Average selling price
In 2025, it is approximately 3,600 US dollars per ton globally; domestic representative amino silicone oil is about 25 yuan per KG
Major manufacturers
Many organic silicon enterprises from both domestic and abroad are involved, competing in terms of amino functionality, viscosity control, and textile finishing performance
Applicable directions should be confirmed separately:
Natural fiber finishing. Soft and smooth finishing for cotton, linen, viscose fabrics, soft and skin-friendly hand feel for knitted fabrics, need to verify whiteness and color lightness.
Synthetic fiber finishing. Silk-like feeling, imitation silk and anti-static treatment for polyester, nylon, and ultra-fine filament fibers, need to verify uniformity of penetration and deposition.
Silk and imitation silk finishing. Lightweight finishing to maintain luster and drapability, need low yellowing formula and precise control of dosage.
Cosmetics and hygiene care. Transparent shampoo and conditioner formulations use microemulsion systems, need to verify transparency and ion compatibility.
Leather and industrial applications. Leather coating softening, coating leveling, paper softness and other scenarios, verified by actual system.
The above data are public industry materials, specific selection should be based on actual fabric system and process verification.
V. Which parameters should be confirmed when choosing amino silicone oil?
Parameter categories
The information that needs to be confirmed
Application directions:
Natural fibers, synthetic fibers, silk, home textiles, cosmetics, leather
Fabric system:
Fiber type, fabric structure, color intensity, weight
Touch style:
Soft and smooth, silky, fluffy, resonant, elastic recovery
Product structure
Amine value, viscosity, ion type, termination method, whether hydrophilic modification
Product form
Solution, emulsion, microemulsion; particle size and storage stability
Process conditions
Washing/impregnation/ spraying, concentration, bath ratio, temperature, drying and baking curve
Compatibility requirements
Coating aids (waterproof, anti-wrinkle, flame retardant), dye ionicity, water quality
White degree and color tone
Yellowing control requirements for light-colored/white/fluorescent fabric
Wash fastness requirements
Number of washes, retention rate of hand feel after washing
Environmental compliance
OEKO-TEX, ZDHC, no APEO, low VOC
Procurement Requirements
Batch consistency data, samples, supplier R&D support capability
Acceptance Criteria
Feel rating, whiteness value, tear/stretch strength variation, wash resistance grade
Six. What should be verified when selecting amino silicone oil?
The wetting property and uniformity of the fabric after pre-treatment.
The matching degree of the amine value and viscosity combination to the target feel style.
Work fluid stability: Observe stratification and roller adhesion after standing after mixing the materials.
The consistency of the sample feel, whiteness, color lightness with the target sample.
Yellowing degree after high-temperature setting (measured by whiteness meter).
Wash resistance: The rate of feel retention after standard washing several times.
Compatibility with the same bath auxiliaries and the influence on dyeing fastness.
Consistency from small sample to pilot production to the entire cylinder.
Economy of dosage: Comparison of actual consumption under the same feel.
Supplier batch particle size, amine value fluctuation data.
Environmental protection test report and export compliance documents.
Commonality and limitations of the same product in different fabric systems.
Seven. How to design and conduct type testing before procurement?
Establish a benchmark for the current silicone oil: Record the model, amine value, viscosity, dosage, process curve and current problems.
Uniform test conditions: The same fabric, the same pre-treatment, the same work fluid pH, the same baking curve.
Set candidate samples: Current products, 2-3 different amine value/viscosity combinations, low yellowing or blocky schemes.
Complete the entire process testing: Small sample → Pilot production amplification → Whole cylinder verification → After washing rating.
Evaluate actual results: Feel, whiteness, strength, wash resistance, cost and batch stability.
Testing items
Uniform requirements
Fabrics and pre-treatment
Maintain consistency or set gradients according to the test design
Product selection
Set the comparison groups according to the amine value, viscosity, and ion type.
Process conditions
Set the concentration and temperature gradient based on the pickling/dipping benchmark.
Frying curve
Carry out according to the actual setting conditions, record the temperature and time.
Evaluation method
Feel rating, whiteness tester, strength test, number of washes before wearout are all standardized.
VIII. Under what circumstances should conventional amino silicone oil not be directly used?
White, light-colored, fluorescent fabric, without using low-yellowing formula.
Mixed with anionic dyes or additives without verifying ionic compatibility.
Requires moisture absorption and sweat discharge of the fabric, but uses hydrophobic amino silicone oil (should evaluate hydrophilic modification scheme).
Export orders have environmental protection requirements such as OEKO-TEX, but the product has no corresponding test report.
Superfine denier or high-density fabrics, with large particle diameters of ordinary coarse emulsions and insufficient penetration.
Work fluid water hardness is high or pH fluctuates greatly, and the emulsion stability has not been evaluated.
Only placing an order based on a small sample feel, without conducting pilot-scale verification.
The supplier cannot provide batch consistency and retention data.
Storage conditions do not meet the requirements of cool and sealed storage or the emulsion has exceeded the storage period.
Needs to be mixed with waterproof, anti-wrinkle, and flame retardant agents to stabilize the bath, and the compatibility has not been verified.
IX. Common Misconceptions
The higher the amine value, the better the feel: Higher functionality does indeed enhance adsorption, but the risk of yellowing increases simultaneously, and the feel is also affected by molecular weight and deposition behavior. A higher amine value does not equal high-quality feel.
The higher the viscosity, the smoother and more valuable: High-viscosity products have strong lubrication but are difficult to emulsify and disperse. The selection should be based on matching the fabric and process rather than simply pursuing high parameters.
Microemulsions can completely replace ordinary emulsions: Microemulsion particle diameters are small, transparency is good, and the dosage is low, but the requirements for the emulsification system are higher and the price is higher. Ordinary finishing scenarios may not be cost-effective.
A small sample is good for a large tank: The soaking temperature, bath ratio, and drying curve of the laboratory and workshop large tanks are significantly different, and the verification of pilot-scale expansion cannot be omitted.
Silicone oil softeners can be mixed randomly: Interaction with anionic systems may lead to emulsion breakdown and silicone spots, and the compatibility must be tested first.
Cheap feel is similar in price: Batch instability leads to the cost of reworking the entire tank due to the cost of the price difference, and the source factory and batch data are more important than the unit price.
Yellowing is solved by post-treatment rinsing: Yellowing originates from amino oxidation, and should start from amine value selection and low-yellowing formula, rather than treating the symptom but not the root cause.
During the off-season, switch suppliers at will: The off-season is a good time to verify the batch stability and negotiate framework prices, but the switching still requires a complete verification process.
X. Recommended Selection Steps
Confirm the type of fabric fibers, color, and feel style requirements.
Confirm the finishing process (soaking/immersion spraying) and existing equipment conditions.
Confirm the whiteness, color lightness, wash resistance, and environmental compliance requirements.
Sort out the list of coagulant agents used in the bath, and assess the compatibility risks.
Select 2-3 candidate products based on amine value, viscosity, and ion type.
Compare small samples to lock in the feel and whiteness.
Conduct pilot-scale expansion verification to confirm consistency from small samples to the entire tank.
Test wash resistance and strength changes to evaluate the economic cost of dosage.
Verify the supplier's batch data, environmental materials, and support capabilities.
Negotiate framework prices and batch acceptance terms during the off-season.
Track the production of the first batch of large quantities, seal and store samples.
Complete multi-tank verification before officially switching and regularly tracking.
Our company, as a provider of the entire organic silicone chain, can assist in comparing the applicability of amino silicone oil, block silicone oil, polyether modified silicone oil, and microemulsions in different fabric systems, amine value and viscosity combinations, and finishing processes. For textile dyeing and printing, daily chemical cleaning, or leather finishing projects, before selection, provide information on fabric system, feel style, whiteness and wash resistance requirements, finishing process, coagulant agents used in the bath, and environmental compliance requirements, and then determine which amine value and viscosity combination and emulsion form scheme to test first, or choose hydrophilic low-yellowing, block soft and smooth, and other modification routes.