Click the following green label to listen to the introduction of measurement and control technology and instruments and the trend analysis of measurement and control technology and instruments admission score line in Southeast University in 2020:
Instrument measurement and control technology and instrument
The first level subjects of optical engineering are classified into electronic instruments.
On December 28, 2017, the fourth round of discipline evaluation, first level discipline optical engineering, was announced by the center for degree and graduate development of the Ministry of education. The evaluation results are as follows:
On December 28, 2017, the center for degree and graduate development of the Ministry of Education announced the fourth round of discipline evaluation, i.e. Instrument Science and technology. The evaluation results are as follows:
Measurement and control technology and instruments of Beijing University of Aeronautics and Astronautics
This major cultivates senior engineering and technical talents with basic knowledge and application ability in precision instrument design and manufacturing, measurement and control, who can be engaged in design and manufacturing, scientific and technological development, application research, operation management and other aspects of relevant technologies, instruments and systems in the field of measurement and control in various departments of national economy.
Training requirements: the students of this major mainly study the basic theories of optics, mechanics and electronics of precision instruments, measurement and control theories and design methods of relevant measurement and control instruments. They are trained in modern measurement and control technology and instrument application, and have the application, design and development ability of measurement and control technology and instrument system of this major.
Graduates mainly obtain the following knowledge and abilities:
Systematically master the broad technical and theoretical basic knowledge in the professional field, mainly including the basic knowledge of mechanics, electronics, optics, measurement and control, market economy and enterprise management; master the contemporary measurement and control technology and experimental research ability combined with light, machine, electricity and computer, and have the design and development ability of measurement and control technology, instrument and system in the professional field;
Main disciplines: Optical Engineering, instrument science and technology.
Main courses: precision machinery and instrument design, precision machinery manufacturing engineering, analog electronic technology foundation, digital electronic technology foundation, microcomputer principle and application, control engineering foundation, signal analysis and processing, precision measurement and control and system, etc.
Main practical teaching links: including military training, metalworking, electrical engineering, electronic practice, cognition practice, production practice, social practice, course design, graduation design (Thesis), etc., which should generally be arranged for more than 40 weeks.
Measurement and control technology and instruments of Tianjin University
This major mainly cultivates professional talents in the field of Instrument Science and technology, It can be engaged in scientific research, application development, design and manufacturing, operation management and other work in related fields. After graduation, it should meet the following requirements after several years of work or study: (1) master the knowledge system with measurement as the center, information flow as the main line, sensing, measurement and measurement and control system supporting each other; (2) be able to propose solutions according to the needs of the project, and consider the society and environment Environmental factors and relevant policies and regulations design, develop instruments and measurement and control system; (3) in the work team, can play a role as a major member or leader.
[specialty features] the students of this major mainly study the basic courses of theory and technology related to measurement, control and instrument, accept the basic training of integrated application of modern measurement and control technology and instrument design, and the graduates will have the ability of design, development and integrated application of measurement and control system and instrument. Interdisciplinary: it is closely related to physics, chemistry, physiology and other basic disciplines as well as optical engineering, mechanical engineering, electronic science and technology, electrical engineering, control engineering and other engineering disciplines. Cutting edge of science and technology: Instrument Technology Based on new principles provides support for natural science research and major breakthroughs. Leading social development: the invention of new principle instrument technology has directly led the leapfrog development of science and technology, contributed to the birth of a large number of new disciplines such as nanotechnology, and played an important role in leading and promoting the development of high-tech and industry and social progress.
[postgraduate entrance examination and employment] can be engaged in product research, design and development, enterprise management and other work in the fields of machinery, electronics, computer application, quality control, etc. the graduates are mostly employed in research institutes, foreign-funded enterprises, companies and large state-owned enterprises in the fields of electronic information, communication, aerospace, instruments and meters, etc. In recent years, about 70% of graduates of this major have gone to graduate school.
Measurement and control technology and instruments of Harbin University of Technology
This major is an important branch of information science and technology. It mainly studies the technology and theory of information acquisition and processing, information transmission and application, microcomputer measurement and control, industrial process detection and control, virtual instrument and sensing technology. It is a high-tech formed by the mutual penetration of computer and information technology, electronics, optics, precision instruments and machinery Intensive comprehensive specialty. It mainly cultivates advanced composite engineering and technical talents in research, development, design and manufacturing of information processing, industrial testing, process control, intelligent instrument and sensing technology, electrical, optical and mechanical integration technology related to the field of information detection and control engineering.
Measurement and control technology and instruments of Southeast University
The Department enrolls students according to the measurement and control technology and instrument major, with the main professional directions as follows:
1. Computer measurement and control technology;
2. Industrial detection and automation instruments;
3. Mechatronics technology;
4 instrument engineering and intelligent system;
5. Vehicle measurement and control technology and engineering;
6. Navigation positioning and measurement and control technology;
7. Virtual reality technology.
The first level discipline of Instrument Science and technology of Southeast University has obtained A-level in the fourth round of discipline evaluation. Now, based on the analysis of measurement and control technology and instrument major of Southeast University, from 2015 to 2018, the actual enrollment of 10, 11, 10 and 12 students respectively. The minimum enrollment in these four years is 383, 393, 384 and 388; the ranking of Science in the province is 2663, 2279, 2716 and 2673 respectively ; the average score of the major is above 55 on the new front line in 2019; the lowest score of the major is 0-1 on the school's filing line; according to the previous year's line difference and then combined with the ranking comparison and selection, it is estimated that the major of measurement and control technology and instrument will be admitted at 399 in 2019. In fact, the lowest filing line of Science in 2019 of Southeast University is 398, about 399, to ensure that the major of measurement and control technology and instrument will be admitted During the college entrance examination in, students who have passed 399 and selected Physics A, another B, can take the measurement and control technology and instruments of Southeast University as the "stable" goal in the third to fifth of the professional volunteers, because in 2019, the enrollment plan of this major is assigned to the engineering experimental class (automation, robot engineering, electrical engineering and its automation, measurement and control technology and instruments, automation and electricity) Gas measurement and control); in 2019, 399 points ranked 2275, ranking top in the first four years, which can be planned in this way. In June 2020, you can refer to the "2017-2019 compilation of enrollment materials of general colleges and universities in Jiangsu Province" for a comparison, and you can refer to the ranking combination line difference. Therefore, this scheme can be used in 2020 with reference to the old college entrance examination scheme.
Measurement and control technology and instruments of Nanjing University of Aeronautics and Astronautics
This major is a large-scale major combining optics, mechanics, electricity and other disciplines. It is a special major in Jiangsu Province. It has aviation characteristics in training mode and curriculum. It has a long history of running a school and has sent a large number of excellent talents to the country.
Main professional direction: modern computer measurement and control system, intelligent instrument, signal analysis and processing, sensor technology, photoelectric detection. The students have solid basic knowledge and proficient foreign language and computer application ability. They can be engaged in scientific and technological development, engineering design, experimental analysis and business management in the fields of computer measurement and control, intelligent instruments, sensor development, etc.
Main professional courses: introduction to measurement and control technology and instrument, test accuracy analysis, sensor principle, digital signal processing, digital test technology, aviation test system, analog electronic technology, digital electronic technology, computer hardware technology foundation, single chip microcomputer and embedded system, etc.
Graduates can be engaged in research work in the field of measurement and control technology, including design and development of measurement and control system, sensor design and manufacturing, technical management in the field of measurement and control, and other research work with electronic technology and computer application technology as the main content.
In the past three years, the enrollment rate of graduates of this major has remained above 30%, and the employment rate has been above 99%. In recent years, the main employment units include Beijing Institute of remote sensing control, Shanghai Institute of measurement and control technology, Nanjing Institute of electromechanical hydraulics, Chengdu Aircraft Design Institute, Beijing Qingyun Aviation Instrument Co., Ltd., Changzhou Toshiba Transformer Co., Ltd., Shante Electronics Co., Ltd., Huawei Technology Co., Ltd., China Guangdong Nuclear Power Group Engineering Co., Ltd., Suzhou Haoya Photoelectric Technology Co., Ltd And so on.
Measurement and control technology and instruments of Nanjing University of Technology
This major is a brand major in Jiangsu Province. It has the right to confer doctor's degree in a first-class discipline. It integrates the technical connotation of electronics, computer, control engineering, precision machinery, optics and other disciplines. In teaching practice, it fully embodies the comprehensive application of multi-disciplinary technology in precision instruments and measurement and control systems, highlights the interdependent relationship between Instrument Science and other disciplines, and makes great efforts to cultivate the master Multi disciplinary technology and can serve for multi-disciplinary talents.
Main discipline: Instrument Science and technology.
Main courses: electrotechnics, electronic technology foundation, sensor principle and application, microcomputer principle and application, control engineering foundation, signal and test system, intelligent mechanical design, digital measurement and control technology, computer control technology, precision instrument design, measurement and control circuit design, intelligent instrument design, photoelectric detection technology, etc.
Most of the graduates of this major are employed in many research institutes and enterprises in the fields of national defense science and technology and national economic construction, such as aerospace, weapons, machinery, electronics, energy, chemical industry, communication, transportation, etc., engaged in the research, design, manufacturing and application of modern measurement and control system.
Measurement and control technology and instruments of China University of Metrology
This major focuses on sensor technology, information processing technology, control technology and intelligent instruments. Through advanced mathematics, college physics, engineering mechanics, circuit and electronic technology, mechanical design basis, automatic control theory, microcomputer principle and application, sensor technology, error theory and data processing, precision measurement technology, measurement and control circuit, automatic detection The study of technology, measurement and control system design, metrology foundation and other courses will cultivate engineering and technical talents who can engage in engineering design, technology development and operation management in measurement and control technology and instruments, measurement and test and related fields. This major is the first national characteristic major, the advantage major of Zhejiang Province in the 12th Five Year Plan and the 13th five year plan. It is an undergraduate major in the excellent engineer education and training program of the Ministry of education. It has rich teaching platforms and resources such as the national experimental teaching demonstration center, the national teaching team, the national excellent resource sharing course and the national off campus practical education base for college students. It has passed the national Engineering education professional certification.
Graduates of this major can be engaged in the design, manufacturing, development and application of measurement verification, measurement control, intelligent instruments, computer software and hardware in measurement and quality inspection institutions, large enterprises, national defense and military industry, aerospace and other relevant departments.
Measurement and control technology and instruments of Jiangsu University
This major is a brand specialty of Jiangsu Province.
The aim of this major is to cultivate advanced engineering talents in the field of computer measurement and control and instruments that can meet the needs of the society. graduation